MC Another Lead by Michal Cacko
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is set to 70% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2.
LFO 2 direct modulation amount for pulse width of square oscillator is 104.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 51.
Tone for oscillator 2 is manually set to 74.
Volume (VCA) volume
Amplification level is manually set to -5.79dB (88).
Pan spread is off.
Noise timbre
Noise level is manually set to 130.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 404.71Hz (89) and is modulated by Note Vel, LFO 1, VCF Env.
LFO 1 mod-matrix 3 modulation amount for low-pass filter cut-off frequency is 4.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 26.
Low-pass filter envelope amount is modulated by Note Vel.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Filter resonance is set to 30 and is modulated by LFO 1.
LFO 1 mod-matrix 1 modulation amount for filter resonance is 34.
Oscillator 1 pitch pitch
Oscillator 1 pitch is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 1 pitch is 9.
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to -1 semitones and is modulated by LFO 1.
LFO 1 mod-matrix 2 modulation amount for oscillator 2 pitch is 7.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.
Phase fx
not yet complete
Multi-Band Distortion fx
not yet complete
Flange & Reverb fx
not yet complete
Delay fx
not yet complete
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 26 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 1 Pitch, VCF Resonance, OSC 2 Pitch, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 1 Pitch | 9 |
| timbre | matrix | VCF Resonance | 34 |
| pitch | matrix | OSC 2 Pitch | 7 |
| timbre | matrix | VCF Cut-off Frequency | 4 |
| name | value |
|---|---|
| LFO 1 Rate | 0.23Hz (59) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Sine |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 1 |
| LFO 1 Slew Rate | 131 |
LFO 2 modulator
Controls OSC 1 Pulse Width Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | OSC 1 Pulse Width Modulation Depth | 104 |
| name | value |
|---|---|
| LFO 2 Rate | 0.83Hz (104) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 26 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.1s (17) |
| VCF Envelope Sustain Level | 0% (0) |
| VCF Envelope Release Time | 1.13s (128) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |